Cleaning Glass

Glass care today is more important than ever. Insulating, Low-E glass requires proper maintenance to ensure their complete effectiveness.

DOs

• Clean glass with regular or ammonia based clreaning agents or a mixture of 1 gallon of cold water and 1/2 cup of vinegar.
• Rince completely with clear water, then wipe dry with a soft cloth to avoid water spots.
• Avoid washing glass in direct sunlight.

 

DON'Ts

• Clean glass with any petroleum-based cleaners or caustic chemicals.
• Use a razor blade, putty knife or abrasive pad to clean the glass.
• Use any form of high-pressure spray nozzle when rinsing your windows after washing.

Cleaning Frame

Keeping your windows and doors clean means more than just glass. Hear are some tips for cleaning your window and door frames effectively without damaging them.

DOs

• Vacumm dirt from sill and track area before washing.
• Clean window door frames with mixture of mild dish soap and water.
• Always rinse completely with clear water and wipe dry.
• Ensure that you clean the condensation channel at the bottom of window or patio door at least twice a year.

 

DON'Ts

• Use abrasive or caustic cleaners or solvents as they may chemically react with the frame materials and cause deterioration.
• Use steel wool or abrasive pads and brushes as they may scratch the surfaces.

Cleaning Drainage Systems

Windows and doors often have a simple drainage system designed right into the products. These water drainage pathways must be kept clear and clean for the window or door to operate correctly.

• It is normal for water to accumulate in the sill or track area with wind driven rain. The water is intended to drain to the outside as water builds up or outside pressure subsides.
• Keep sill or traci areas clean of dirt or debris.
• Make sure that outside and inside drainage holes and sill area kept clear of any dirt, sand or building materials.
• Use a small, soft bottlebrush to clear openings.

Cleaning Screen

• Remove screen from the Window or the Door.
• Wash on a flat and clean surface with mild soap and water using a soft brush.
• Rince and wipe dry.
• Reinstall it in the Window or the Door.
• Click here to see how to remove and install screens.